Step 1:The backside of this origami paper is completely white.
Turn the paper.
Step 2:
Roll the paper up. Make sure that the black part is on
one side of the model.
Step 3:
Hold the model the same as I do.
Then press the black part inwards with your other hand,
see arrows.
Make sure that the red part doesn't go inwards.
Step 4:
Now, press the black part inwards from all angles,
see arrows as example.
Step 5:
Turn the black part clockwise, see arrow
Step 6:
Hold the model the same as I do here.
Take the black part in your other hand at the place indicated
by the 2 small arrows. Then, push this black part a little to the
left, into the red tube (see large arrow)
Step 7:
Now the model looks like this
Step 8:
This is the other side of the model.
Hold the model the same as I do here.
Then press the edge inwards with your other hand (see arrow)
Step 9:
Press the edge inwards on more places, see arrows as
example.
Step 10:
Now this side of the model is closed too
Kaboom! (done)
I glued 3 dynamite sticks together here. I used 2 stripes
of black paper to hold them together.
