Step 1:
Prefold the large table paper in half. Then fold both edges to this prefolded centerline.

Step 6:
Turn the model.

Step 5:
Press flat, see purple arrows.

Step 2:
This is the other side.
Prefold over the two diagonal lines first. Then use these prefolded lines to place the folds over the two longer lines.

Step 4:
Prefold the two outer edges to the centerline. Then fold the four short inner edges to these two prefolded lines.

Step 3:
Press flat, see purple arrows.

Step 10:
Fold the edge to the centerline two more times.
Then unfold the folds of step 9 and 10.
And repeat both steps on the left part of the model.

Step 8:
Make an outside reverse fold on the two ends.
Make the same folds as in this photo on the other side (=mountain-folds).

And repeat this step on the left part of the model.

Step 9:
Prefold in half, then fold the edge to this prefolded centerline, see arrow

Step 7:
Fold the two inner edges to the prefolded lines of step 4

Step 16:
Glue these two edges together.

Step 15:
Fold over the yellow line, make the same fold on the other side.
Repeat steps 12 to 15 on the other side of the model.

Step 12:
Fold over these four prefolded lines, use the next photo as help.

Step 11:
Fold over these three lines.

Step 14:
Fold the long upper edge over the edge indicated by the arrow. Glue them together afterwards.

Step 13:
I flipped the model 180 degrees here, this is the right part of the model in the previous step.
First, fold the edge indicated by the purple arrow downwards, then fold the edge on the left downwards.

Step 21:
This paper for the drawer is half the size of the paper for the table, see photo of step 1
Prefold in half, then fold both halfs in three parts of the same size

Step 19:
Bend / fold the upper part of the table leg outwards a little and the lower part inwards, see purple arrows.
(This step isn't really necessary, but gives the table more elegance).

Step 20:
Ready.....

Step 18:
Fold both edges inwards a little.

Step 17:
Fold the table legs in half

Step 22:
Fold both parts in half. Unfold the model afterwards.

Step 28:
Glue the edges of the corners together.
And fold over the two yellow lines.

Step 25:
Fold both corners to the center of these prefolded squares, see arrows.

Step 26:
Fold over these two prefolded lines.

Step 24:
Fold in half and unfold the model afterwards.

Step 23:
Fold in three parts of the same size.

Step 29:
And the drawer is also ready....

Step 27:
Fold the four corners inwards and the edges straight upwards

Step 30:
The stool paper has the same size as the drawer paper.
Repeat steps 1 to 8 on this paper.
Prefold in half, then prefold both halfs in three parts of the same length.

Step 31:
Prefold over these two lines.

Step 32:
Fold the (prefolded) mountain-fold lines towards each other and the legs into a straight angle with the seat, see next photo.

Step 33:
Fold the two upper edges over the four lower edges. Glue them together afterwards.

Step 35:
Fold the four stool legs in half.

Step 34:
Make the same two folds on the other legs, see purple arrows.

Step 36:
And the stool is ready too.

Step 38:
Fold the four corners backwards and your mirror is also ready.

Step 37:
I folded a white rectangle paper around a silver colored paper for the mirror. You can take what ever paper size you like for the mirror.